Samsung Galaxy J7 (SM-J700P) variant can now be updated to J700PVPS1AQD1 Android 6.0.1 Marshmallow. This is not a very big update but still, there are many important fixes and patches applied. J700PVPS1AQD1 Android 6.0.1 Marshmallow is rolled out in stages by Samsung so there is a heavy chance that you might not have received yours yet. If the update has not reached you yet then you can download and install J700PVPS1AQD1 Android 6.0.1 Marshmallow manually. Just follow the guide below, but first, let’s check out the specs the of the phone.
Installing stock Android 6.0.1 Marshmallow (J700PVPS1AQD1) via Odin tool is an official process so you won’t lose warranty. The process doesn’t require any root access or custom recovery. Let us clear one thing here, this guide is only meant for Galaxy J7 (SM-J700P). To confirm the model no. go to Settings > About Phone. Please don’t try it on any other models.
Follow our step by step guide on How to install Stock Android 6.0.1 Marshmallow (J700PVPS1AQD1) on Galaxy J7 (SM-J700P).
ANDROIDTUTORIAL.NET WILL NOT BE HELD RESPONSIBLE FOR ANY KIND OF DAMAGE. PROCEED AT YOUR OWN RISK.
Table of Contents
Prerequisites
- Before proceeding any further backup all your important data like Emails, Messages, Personal Photos, and Videos.
- Download and install Galaxy J7 (SM-J700P) USB drivers on your PC.
- Make sure USB Debugging mode is enabled on your Android Device. You can enable USB Debugging by going to Settings > Developer Options.
- The device should be charged up to 70% to avoid any unexpected shutdowns. This is very important, any shutdown during the process can damage your device permanently.
Downloads:
How to install Stock Android 6.0.1 Marshmallow J700PVPS1AQD1 on Galaxy J7 (SM-J700P)
Step 1: Download J700PVPS1AQD1 and Odin for Galaxy J7 on your PC.
Step 2: Extract downloaded firmware to get tar.md5 file.
Step 3: Now to turn off your mobile and boot it in download mode by pressing and holding Volume Down + Home + Power keys at once for some time. An android logo will appear, now press Power Button again to enter into the Download Mode.
Step 4: Open your Odin folder and right click on Odin file and then click on Run as Administrator. After that connect your phone to PC with USB cable.
Step 5: In Odin tool one of the ID: COM boxes will turn yellow with the COM port number. This means your phone is connected successfully.
Step 6: Now click on AP and select md5 file of firmware which we extracted earlier.
Step 7: Before clicking on start make sure Auto Reboot and F. Reset Time options are selected, but re-partition option must NOT be ticked.
Step 8: Your Galaxy J7 will reboot once the installation is completed. Keep the device connected to USB until you reach the home screen.
Congratulations! You have successfully installed Stock Android 6.0.1 Marshmallow J700PVPS1AQD1 on your Samsung Galaxy J7 (SM-J700P).
